BLACKTHORN C SLX
BLACKTHORN C SLX
About
About
The Blackthorn C frame blends a stiff carbon fiber chassis with our progressive trail geometry and Split Pivot suspension design. The result is a well-balanced platform for an all-mountain bike that descends with gusto, rails through features, and makes climbing up for lap two as painless as possible. The Fox Float X Factory shock delivers 140 mm of travel to guide you through whatever the trail serves up. On-bike cargo features hold your tube, pump, and repair kit, and more on the frame to lighten up your hip pack — or allow you to ride pack-free. We made Blackthorn C the best all-mountain bike frame around. Take it and make it your dream bike.
Shipping
Shipping
In Store Pick Up, Local Delivery, & Shipping Available
Size
Size
Measurements based on:
- a fork measuring 405mm with 50mm offset
- a 700 x 38mm tire measuring 706 mm in diameter
- Stand over measured vertically to top of top tube from a position 50mm forward of BB center
ADDITIONAL INFORMATION
FEATURES
6061-T6 Aluminum Frame
We use alloy tubing developed specifically for the Journeyer frame, which is then heat-treated to T6 alloy standards for extra strength and durability.
12 x 142 mm Thru-Axle Rear
Waxwing Carbon Fork
Gravel Geometry
Internal Cable Routing
Dropper Post Routing
Flat-Mount Brakes
Cargo Capability
650b x 47 mm Wheels and Tires
Salsa Cowbell Drop Handlebar
Dual Wheel Size Compatibility
BUILD KIT
FRAMESET
Frame - Journeyer Drop-Bar Thru-Axle
Fork - Waxwing
Color - Aqua
DRIVETRAIN
Front Derailleur - N/A
Rear Derailleur - Shimano GRX RX812
Cassette - Shimano M7000 11–42t, 11-speed
Chain - Shimano HG601
Crankset - Shimano GRX RX810, 40t on sizes 53 cm + (Shimano GRX RX600, 40t, 165mm arms on sizes 49 and 51 cm)
Shifter - Shimano GRX RX810-R/LABrakes and RotorsShimano GRX RX810 brakes, Shimano RT10 rotors (Center Lock, 160 mm)
COMPONENTS
Headset - FSA NO.42 ACB IS-2
Stem - Salsa Guide 31.8, 6-degree
Handlebar - Salsa Cowbell 3, 31.8
Grips/Bar Tape - Black Cork
Seatpost - Salsa Guide, 27.2 x 350 mm
Saddle - WTB Volt Medium, Steel, 142 x 265 mm
WHEELS
Front Wheel - Shimano Tiagra RS470 12 x 100 mm hub, WTB EZR i23 650b rim, 28h
Rear Wheel - Shimano Tiagra RS470 12 x 142 mm hub, WTB EZR i23 650b rim, 28h
Tires - Teravail Washburn, 650b x 47 mm, 60 tpi, Light and Supple casing, tubeless ready
FRAME SPECS
Design Wheel/Tire Size - 650b x 47 mm
Alternate Wheel-Tire Sizes - 650b x 47–50 mm; 700c x 32–50 mm
Rigid Fork Length - 405 mm axle-to-crown
Fork Offset - 50 mm
Headset-Upper - IS41
Headset-Lower - IS52
Crown Race - 40 mm
Seatpost - 27.2 mm
Seat Collar - 32.0 mm
Dropper Compatible (Routing) - Yes, internal
Stem Clamp / Steerer Clamp Diameter - 28.6 mm / 1 1/8"
Front Derailleur Mount - 31.8 mm OD, bottom pull
Front Derailleur Type - 2x, bottom swing
Bottom Bracket - 68 mm BSA
Crankset (Max Ring) - 1x crankset: 42t max.; 2x crankset: 48/33t max.
Front Brake (Rotor) - Flat mount 160 frame standard (180 mm max.), 35 mm thickness, 42 mm bolt length
Rear Brake (Rotor) - Flat mount 140 frame standard (160 mm max.), 20 mm thickness, 27 mm bolt length
Front Spacing - 100 mm
Front AxleM12 x 120 TP = 1.5, TL = 12 mm thru-axleRear Spacing142 mm
Rear Axle - M12 x 169 TP = 1.0, TL = 14 mm thru-axle
Derailleur Hanger - SRAM UDH
Downtube Accessory Mounts - Yes, One
TopTube Mounts - Yes
Rack Mounts - Rear: yes; Front: yes, low rider
Fender Mounts - Yes
Water Bottle Mounts - 49 cm frame: 1 in main triangle; 51–56 cm frames: 2 in main triangle; 57–60 cm frames: 3 in main triangle
Three-Pack Mounts - 47–53 cm frames: 1 on down tube; 55–60 cm frames: 1 on down tube + 1 on seat tube; All sizes: one per fork leg
SIZE CHART
- a fork measuring 405mm with 50mm offset
- a 700 x 38mm tire measuring 706 mm in diameter
- Stand over measured vertically to top of top tube from a position 50mm forward of BB center